3.主要论著
(1) Min C, Li H, Gao X, Wang K, Xie L. Numerical investigation of convective heat transfer enhancement by a combination of vortex generator and in-tube inserts. Int Commun Heat Mass Transfer, 2021, 127: 105490.
(2) Min C, Yang X, He J, Wang K, Xie L, Onwude DI, Zhang W, Wu H. Experimental investigation on heat recovery from flue gas using falling film method. Thermal Science and Engineering Progress, 2021, 22: 100839.
(3) 朱仙仙, 闵春华*, 郭宇虹, 王坤, 解立垚. 加热板液滴蒸发的理论分析及实验研究, 热科学与技术, 2021, 20(1): 28-33.
(4) 王迪, 闵春华*, 杨旭光, 王坤, 解立垚. 电子元件散热器翅片自然对流散热性能研究, 热科学与技术, 2021, 20(4): 313-317.
(5) Min C, Chen J, Yang X, Wang K, Xie L. Inverse simulation to optimize the rib-profile in a rectangular flow-channel. Int Commun Heat Mass Transfer, 2020, 114: 104567.
(6) Min C, Yang X, Wang K, Yuan Y, Xie L. An inverse optimization of convection heat transfer in rectangle channels with ribbed surface based on the extremum principle of entransy dissipation. Int J Heat Mass Transfer, 2019, 130: 722-32.
(7) Min C, He J, Wang K, Xie L, Yang X. A comprehensive analysis of secondary flow effects on the performance of PEMFCs with modified serpentine flow fields. Energy Convers Manag, 2019, 180: 1217-1224.
(8) 张硕, 闵春华*, 何静, 齐承英. 降膜直接接触余热回收性能研究, 热能动力工程, 2019, 34(12): 86-92.
(9) 陈军伟, 闵春华, 张媛, 王坤, 谢立垚. 脉动流强化翅片散热器数值模拟研究, 河北工业大学学报, 2019, 48(5): 33-38.
(10) 何静, 闵春华, 张硕, 王坤, 解立垚. 降膜喷淋烟气余热回收实验研究, 节能技术, 2019, 37(5): 403-407.
(11) Min C, Li X, Yuan Y, Chen Z, Tian L. An inverse study to optimize the rib pitch in a two–dimensional channel flow problem for heat transfer enhancement. Int J Heat Mass Transfer, 2017, 112: 1044-1051.
(12) Gong JY, Min CH*, Qi, CY, Wang EY, Tian LT, Numerical simulation of flow and heat transfer characteristics in wavy fin-and-tube heat exchanger with combined longitudinal vortex generators, Int Comm Heat Mass Transfer, 2013, 43(4): 53-56.
(13) 闵春华,郭宇虹,田丽亭,齐承英,疏水表面上液滴滞后阻力的实验研究,工程热物理学报,2015,36(1):172-174.
(14) 闵春华,齐承英,王恩宇,田丽亭,秦亚举, 波纹翅片开设涡发生器强化传热数值模拟, 工程热物理学报, 2014, 35(1): 119-122.
(15) Min CH, Qi CY, Wang EY, Tian LT, Qin YJ, Numerical investigation of turbulent flow and heat transfer in a channel with novel longitudinal vortex generators, International Journal of Heat and Mass Transfer, 2012, 55: 7268-7277.
(16) 刘春节,闵春华*,齐承英,王丹,田丽亭,王进,涡量强度强化传热机理数值模拟,河北工业大学学报,2014,43(3):65-68.
(17) 闵春华, 齐承英, 金晶, 王秀春, 涡发生器增强片式散热器散热性能的数值模拟, 河北工业大学学报, 2012, 41: 32-37.
(18) 闵春华, 杨立新,齐承英, 董江峰, 矩形通道内纵向涡发生器作用下流场的PIV实验研究, 河北工业大学学报, 2011, 40: 59-62.
(19) Qi CY, Min CH, Xie SQ, Kong XF, Experimental study of flow and heat transfer in rectangular channel with novel longitudinal vortex generators, Journal of Enhanced Heat Transfer, 2010, 17: 301-311.
(20) Min CH, Qi CY, Kong XF, Dong JF, Experimental study of rectangular channel with modified rectangular longitudinal vortex generators, International Journal of Heat and Mass Transfer, 2010, 53(15-16): 3023-302.
(21) 闵春华,齐承英,谢尚群,孔祥飞, 新型矩形翼纵向涡发生器流动与换热实验研究, 热能动力工程, 2010, 25: 43-47.
(22) 闵春华,孔祥飞,董江峰,齐承英, 矩形通道内八边形翼纵向涡发生器强化传热的试验研究, 动力工程学报, 2010, 30: 607-610.
(23) Min CH, Tian LT, Qi CY, Wang EY, Qin YJ, Numerical simulation of flow and heat transfer characteristics in wavy fin-and-tube heat exchanger with novel combined longitudinal vortex generators, Proceedings 2012 International Conference on Materials for Renewable Energy and Environment, 1475-1479, 2012.05.18-20, Beijing.
(24) Min CH, Qin YJ, Qi CY, Numerical Simulation of Flow and Heat Transfer Characteristics in Rectangular Channel with Novel Longitudinal Vortex Generators, Advanced Materials Research, 2011, 455-456: 356-362.
(25) 闵春华, 金晶, 王秀春, 齐承英, Numerical investigation on natural convection heat transfer for panel type radiator mounted with longitudinal vortex generators, Proceedings 2011 International Conference on Materials for Renewable Energy & Environment, 20-22, 2011.5, Shanghai.
(26) Min CH. A novel three-dimensional, two-phase and non-isothermal numerical model for proton exchange membrane fuel cell. J Power Sources, 2010, 195(7): 1880-1887.
(27) Min CH. Performance of a proton exchange membrane fuel cell with a stepped flow field design. J Power Sources, 2009, 186(2): 370-376.